YTread Logo
YTread Logo

Civic: $500 Ebay Turbo Kit Installation

Feb 27, 2020
there is a $98 shipping to my front door now it didn't have all this stuff in the description that is in the photos but everything comes with it, it came with the oil lines, gaskets, timers,

turbo

manifold flanges , here's the

turbo

, I'm not exactly sure what. The size is, but I will check it and let you guys know on the Peiping intercooler pipe, so yeah, this is it and it will continue. He says it's capable of making 450 horsepower, but we're not going to do that. The car isn't going to be anything like that right now we're probably only like eight pounds so yeah guys but I'm really excited to get the turbo kit if you want to see this build subscribe if you haven't already and it's, It's going to be fun, it's going to be fun to just have a turbo kit on the car, it's going to be a lot of fun, so yeah, 500 bucks on eBay, I'm not sure how it performs before everyone says, oh, you know, that's such a kit. cheap, it costs $500, we are going to try it.
civic 500 ebay turbo kit installation
Yeah, okay guys, so we'll get it ready to install the turbo kit. The first piece that will be fitted is the turbo manifold and yes, it is quite simple what we are doing here. I already have the factory. I already have the factory metal gasket. there I'm going to reuse that one instead of the cheap one that comes with the kit and this is going to be simple, I'm going to install it exactly the same way you would take the headers off and put them on, so yeah, first part of the kit here, we're going to put this up and we'll be ready to go guys so basically now we're just loosening these bolts that way I can time the turbo thumbnail now when we got the turbo it was like this this is the train. line, so basically we just have to turn it 180 degrees, so right there and then tighten it again, tighten it again to wherever it fits in the car, we're going to tighten one of them right now, so we can adjust it later, this is the feed line, which is the return line, the return line should be at the bottom and then we're going to have to loosen it as well to time it and release it there for when we get it in the car, but all they do to loosen them and tightening them is just tightening these bolts right here and these loosen and loosen these and that's it, let's take a good look guys, so he's under the car and we're ready to go.
civic 500 ebay turbo kit installation

More Interesting Facts About,

civic 500 ebay turbo kit installation...

These are the gaskets and the turbo, so he's just going to push it up into place, let's try to get these gaskets right and I'll just leave them there so you can hold them in place, let me get the nuts for them. Shawn, you have the other one, then I push it up, push it up, yeah, okay guys, so basically this is what we have. I'm not going to be able to show you this and it's going to get a little dark under the car, so this is what I'm going to do this with a sandwich plate and basically I'm going to use this for my oil supply line, so here are two holes that don't have.
civic 500 ebay turbo kit installation
I haven't figured out which direction I'm going to put them in yet, but I'm going to stick this on, most likely it's here or there are adapters for it to fit here, but most likely it's here, this will supply oil to the turbo and give them I'm showing this because it won't fit. under the camera is not going to get a good angle under the car so I'm going to show it to you outside the car so yeah here it is here it goes so the supply line is going to go from here to the turbo and basically what is it this.
civic 500 ebay turbo kit installation
I'm going to do where the oil filter was on the back of the block, this piece here is going to bolt onto the back of the block and press the way it's set up, press the sandwich plate on the back of the block and then also what I'm going to have to do now is bolt on the oil filter and then you've got a new oil supply line and basically you don't have to take off the oil pressure switch and things like that and it's just going to go right in the back, it's just It's going to be located right on the back of the block where the oil filter was, yeah okay guys so we just installed the turbo kit we have a little bit more to do.
I haven't connected the boost yet. vacuum lines, I still need to figure out what's going on with the instance vacuum port right here is tight, so I need to figure out how to open it now. I was going to splice it into this, you know, put a T connection, but I don't want to run too many things in there. I need to connect the exhaust valve to that tool, so I still have a lot more things to do. I need to remove this. This is the ugliest weld I've ever seen, but dude. It only cost me 20 bucks to do it and I try to go to at least 15 stores and no one could weld so he did it and said it wasn't going to look pretty.
I would have to sand it, but I needed him to do it. So I did it for 20 dollars. I can't complain, it's ugly, but I'll hit it with the grinder and the fin will lower it and it'll look a lot better than it does, so yeah, I have to hook it all up. I didn't connect that now because the chip is arriving. I'm running the p75, it has a chip and will be on Chrome, so once the rewritable chip arrives, I asked Xena cron for it the day before yesterday. She said it will take a couple of days to get here so yeah the car is almost ready guys so once I insert the chip once I insert the chip I have to insert the chip too.
I also have to place the bridge. harness for the ECU once all that goes in you should be able to get this thing working. I'll do it with eight pounds and hopefully, uh, yeah, hopefully, it works well hopefully, the turbo system works well now, let me know, let me show you. And now that? The turbo, the turbo. It took me about ten minutes to get this thing to start spinning. I don't know if it was the fluid, even after checking the line and making sure fluid and everything was coming out. About 10 minutes for it to spin so you know what it has in there and I can't even show it to you now.
I can't go down with the camera, but yes, so everything is connected, the drain line is hooked. All this up, I try to get these intercooler pipes in as close as possible, we made some makeshift brackets from Home Depot, that was five bucks and yeah, it's all set as of now with everything going on, I got , you know, only five hundred dollars on the turbo kit twenty dollars so the ECU was $60 the ECU was $60 and the sandwich board was $20 the chip the chip was about $30 so yeah I got a little over $600 on the turbo system and yeah hopefully it sounds good hopefully it works good, I mean just sitting there it works good, but I haven't been able to put it in a cab yet because there's still a lot of other stuff that I got once the chip arrived.
I'll be fine with that now I have to change the injectors. I have to put in a fuel pressure regulator and a fuel pump so all of that will be arriving soon and the good thing is I have everything to get it where it needs to go. to go and you know, I have everything to get it to where it needs to be, as far as working properly with the chip and everything, and it will be a basemap chip, it will be something simple, just drive it around a little bit. and there, but just to make sure that all the systems are working properly and everything is working correctly and then I need to take it to the dyno to tune it, so there's still a lot more to do, but although the whole kit is on the hard drive, it's done and it wasn't really difficult it was actually pretty easy to do you guys can do it yourselves and about a day or two you know it doesn't take long and it's pretty simple so yeah but that's it guys kit five hundred dollar turbo. install it, I picked it up on eBay if you've been watching the channel, I made a couple of I made an unboxing video if you want to know everything that was involved, everything that was in the turbo kit, watch that video because They explain everything that was in him so yeah that's it guys but the $500 eBay turbo kit I'm really excited we're opening the booth soon and yeah but that's it guys thanks for looking if you haven't already followed on Instagram in 79 productions. on instagram you will get updates much sooner than on youtube so follow me on instagram and then yeah that's all guys but like, comment, subscribe, I will see you in the next one God bless you.

If you have any copyright issue, please Contact