Building My Dad His Dream Truck Part 6

air, which is great, but let me take this, let me throw it for you, come, go and go, this is it. a ball of fur here, let it go so you don't do it, jorgito, I don't know if it's him or her, but fluffy, super soft, okay, so here's the airbag plug that we just picked up from the Chef Chuck's auto

part

s that should do the trick right there because ours completely melted oh yeah what were they fixing here? He quickly realigned our door perfectly and saw that there was just a man with hair outside, that guy is on point, right there, car guys, I tell you. which you notice everything, but you know what we're going to, we're probably going to go to the paint store right now and see if we need some paint for the

truck

, so we come back. everything we need, we have some paint, supplies, the paint itself, some other

part

s as well and most importantly the airbag clip, so let's go ahead and change these suction cups and finish our dashboard, so check it out, we repaired it professionally and It looks absolutely amazing, it looks almost OEM.

That's for our old clips. Check that they are well done and that they are fried and crispy. Usually you can pull the wires out of the clips, but that wasn't the case here, so we just had to solder. on the new clips, so if you need some of these new clips, I'll definitely leave the link below, but as they are now, all we have to do is attach this to the airbag and then put the rest of the board together. Alright, we ended up with a script and it turned out absolutely amazing, everything came back together without a problem, except for these bolts here that we had left over, but I mean, it's strong enough, no joke, these are just our miscellaneous bolts that they pile up right there, but Since we're now going to move one on to the next and those are actually our body panels, we're going to go ahead and remove the hood and the fenders and prepare them for painting, so we finally have all three. these worn panels now we're going to go ahead and prep the gun a little bit, make sure it's nice and clean, then we'll pour our paint and we'll come back here, the wax and grease remover, and then we're just going to paint these fenders, I'll just trim them off. , I'm just going to paint the edges, but for the hood we're going to paint the entire underside, so let's go ahead and prep it, so we just sprayed on our first coat and it came out nice and smooth.

I'm really happy with how well Mason is spraying right now. I'll use it in a while mate, this material is actually quite good, nice and soft. I mean, it's a coat and covered an amazing duo, yeah, I love it so far. We're probably going to do one more coat and that's probably it and we're probably going to do two trainers or one coat of clear. Do you think a clear coat is definitely necessary? Most of these things are going to be covered because I noticed one or two mistakes, you know that too, but it's not a big deal, so let's go ahead and mix a little more and then spray another coat, so finally we apply a clear coat in all these parts and they turned out quite good for an exterior.

There's a little bit of junk on the paint job, but you know, most of these things are covered up like we mentioned before and as for the fenders, we went ahead and painted it completely just to see the color and also make the process combination much easier. and many of you are asking what color we are going to paint the

truck

and what color we are going to paint it. We'll just use the original two tone color because I don't think they offer That color scheme they no longer offer the 5th generation for the 4th generation with a fig.

This will be a unique truck and color too, oh yeah, I think it will look really cool, especially with the fenders that will be placed here, a nice silver. Color man, this truck is going to look very complete, but a lot of things in this video didn't actually go as planned because those parts didn't arrive, but you know, we still made some progress, we even built the fence that we built. We completed the interior and we also figured out our cooling system we figured out how we're going to do that so this truck is going to be completed here real soon so make sure your post certifications are on because this thing is going to be an absolute beast so Va going to be a mess for today's video guys if you want the inside scoop before YouTube definitely follow us on Instagram and also if you want to help support your guys be sure to check out Goon Squad Calm and Coffee Sumerge so with all that said that, thank you all for all the love and support, be sure to leave your comments and thoughts below, see you next time, peace.