Anillo color ORO con moneda de 10 pesos ..!! Como fabricar tus propios anillos paso a paso.

On YouTube, have a very good night, all of you, because today we are going to break the Mauser of this 10 peso coin. We are going to make a little ring and see how it turns out and leave me your comments, which coin would you like us to make rings? Right now I found this coin. Quite interesting, it's half an Australian 45 penny. Maybe I can create a pretty interesting ring, but I'm still thinking that if we do it, well, gentlemen, I think that Mexican coins always make our work easier since we don't have to make any holes like the American ones.

By only removing the center part of these, it is ready to start working on them, so we are going to start by removing the center of the coin. This is a fairly shiny coin in very good condition. It is a coin from the year 2015 that we got in very good conditions so let's start for that we are going to use these dice and there it is gentlemen that is what we are looking for that only the rim of the edge remains so that is the first step center of the coin let's continue well the next step would be to clean the inside a little remove the corners with this tool that I will gladly leave little by little in the description of the video where you can get all these tools if you one day want to do this type of work now what do we want on the outside of the ring We want the 10 peso part with the year 2015 or we want the part of the United Mexican States on the outside.

In this case I am going to leave what has been the part of the United Mexican States on the outside because it has a little more designs. and the ring would shine, it would shine better, so what we are going to do, let's continue, well, gentlemen, now we are going to use the hydraulic press. This hydraulic press that you see here was manufactured by yours truly. In reality, they are not very expensive, they cost about 60 to 100 dollars depending on what you are looking for but on this occasion well I wanted to make mine that is a 66 ton hydraulic jack but and well the rest is if one day you would like to make your own and have access to a welding machine well I will gladly give you the measurements of this machine.

Well, what continues now is to make the cone shape that we are looking for to start forging the ring. Remember that if you want the part of the United Mexican States facing outwards, you have to leave it facing inwards, which is why It is important to sometimes have these different sizes of the posts or pellets, whatever they call them, depending on the hole that a coin has in this case, this one because it would be very small and we are going to use the largest one we have, which is this one but with this press because I realized that it has a lot of strength so it is easier to bend it without heating it if it were another type of material another type of coin well if we could heat it there it is that is the shape of cone that we are looking for in a coin so that It is little by little that it will take hold of the figure that we are looking for, so there it is, you see how it still has the

color

that we are wanting to obtain in the end, so let's continue, well, the rest of the work is going to be done with the break Fraser.

If you know about this machine, if you have any questions about it, you can leave it in the comments or I will leave in the description of the video the link where you can buy it. You can even get it at Walmart. It has a price of 110 dollars. It is one of the the cheapest ones but it works for the job so now that we have the coin in the shape of a cone, we are going to proceed to continue forging it now, yes, I think we have to heat it a little so that they talk about the material and we can continue making it in the shape of a ring, so Let's continue, we are going to try to heat it as little as possible so as not to lose too much of the

color

we are looking for.

You can't feel it, but the material feels quite hard, but we are going to try to work it like this here and you can see that it is getting a a little harder and harder but little by little it is grabbing the figure we are looking for, well, that's more or less the figure we are looking for. One of the most difficult things when doing this work is removing the edge, if it doesn't focus Well, what is already the ring, but the edge on the eastern edge is a little difficult to work on, but for that we bought these small hard rubber cubes that help us a lot.

These are connected to the drill and the coin is placed here, then now We can start working on that edge and that is what we are going to do right now. These pieces cost around 12 to 15 dollars. The truth is, they are not very expensive and they are very useful for you, so let's continue for that. We are going to use this 220 sandpaper. Then we will to use a finer and finer one little by little we are going to reduce the sandpaper but it was working very well to begin to begin to reduce the edge that we do not want good and the final result well more or less it would look like this with a little less eyebrow on this side but we are not done yet we still have to close this side more since this side is a little more closed than this one and for that we are going to use now the dice the cones these to start giving the figure so Let's continue, then we are going to proceed to close the ring so that it begins to take on a little more shape and now I am going to show you how to do it.

For that, we are going to use the hydraulic press again, which is going to help us a lot with this material, which is quite hard and we press it a little bit, let's see how it looks and if a little more is needed, then we press it a little bit more. The truth is that these hydraulic presses help you a lot when it comes to this type, from there you can see how I think it is. We had a very good time in the camera but this one I think that if we went a little bit there you have two options, you can only open it more or you can close it more depending on what you want to do and on this occasion since the ring is a little big, well I think we are going to close it, close it on the other side so that it is a little more even.

Well, there it is more or less even on both sides. Here we have a little edge because of the edge of the coin, but we are not done yet, so We are going to continue working, we are going to continue polishing it and see the final result. We are close to finishing and I think it will be a nice ring made of a 10 peso coin. Let's continue because I think it already has the necessary figure that we were looking for as for a ring and one of the very important points is the polished or cleaned and for this occasion we are going to use this one, it is known as stewart super, it is like a very fine fiber to clean or polish, so you will find it in the ibi or in on amazon you can get it extra finest and wow 40 super fine great so there it is that is the one we are going to use and it is going to give it a very special tone so we are going to do it here on the screen so that you can see what it does it is finished The longer you leave it, the more public it will be, so that depends on you and little by little it is gaining the shine that we are looking for, so let's continue because this is how more or less the ring would look, gentlemen, where the ten peso coin is a little more clean more polished and you can continue cleaning you can continue polishing until it is a little brighter and get the results we are looking for but in order not to make this video so long I think it is clean enough there there is the legend of the Mexican USA beautiful beautiful ring somewhat thin but pretty enough to show off, well there it is gentlemen I hope you liked this video remember to subscribe and give me a like we are pending work we have metal detection videos very soon and we have videos of some interesting coins that we have to tell you talk so these gentlemen more or less the final result this ring gentlemen well I'm not going to wait a little longer what I'm going to give you in today's video is going to be this coin of half an Australian penis the winner decides if we make it ring or He sent it to you like this for your collection so you know you just have to leave a comment telling me that you want to participate and we will choose a winner from the people who have commented on this video so my friends I say goodbye thank you very much for your attention we will see you in a next video and remember that this was in michigan diggers again greetings and until next time