YTread Logo
YTread Logo

$50 Bow Build Challenge (Buy Tools & Materials To Make a Bow Under $50) Beginner Bow Making.

Jun 06, 2021
Today we are trying to

make

a bow for 50, including

tools

, arrows, feathers and bowstring, so I made some videos highlighting how you can

make

a bow really cheap. 10 15 20 Some people asked me what's going on? the

tools

rightly, because I didn't calculate the tools there, now I intended to make only

materials

, but some people don't have the tools. I want to see today if I can accept the

challenge

of

making

a bow, arrows, fletching and string. for less than fifty dollars now this hurts me because I'm going to use a lot of methods here that aren't good personally I don't like cheap gear I like it I like really nice things but that's not how I started with cheap gear now a quick tip is that you can go to second hand markets well if you live in a time in history where they are available or in antique stores or garage sales and you find really good and cheap equipment, there you go, amazing, thank you very much.
50 bow build challenge buy tools materials to make a bow under 50 beginner bow making
You for shopping at Shatterproof Archery, well that was a guy, you're not even close to what I needed, so basically we have 28 bucks to get tools, arrows and fletching, a bowstring and a classic scraper, a file sharpener , a knife, a chainsaw file, thick wrappers. arrowheads uh, it shouldn't be a problem, we made a budget, but barely, so this is going to be a lot harder than I thought. I hope this works. I don't even know if I can make a bow with this. I have everything. the tools we have all the

materials

and now we will go back to the workshop and we will

build

this bow, we will make it work, although I am a little nervous because this was not easy, I am using a very, very small amount of tools, which means that the time time to make this bow will be much longer because I will be using a razor blade basically all the time.
50 bow build challenge buy tools materials to make a bow under 50 beginner bow making

More Interesting Facts About,

50 bow build challenge buy tools materials to make a bow under 50 beginner bow making...

Would you be okay if I use this chair? laughs Hi guys, I'm I'm very excited because we are launching shatterproof archery products. Now I need your help if you want to place the order now so that we can deliver it to you in a month. It would be fantastic. Here's why we're pre-ordering. from you and we are going to place our order to our supplier on April 1st, so place your order before April 1st and then you can receive it in mid to late April. I will deliver it to you as soon as possible and then that will allow us to have it in stock all the time, but we are placing this first order in advance.
50 bow build challenge buy tools materials to make a bow under 50 beginner bow making
There are incentives for you to go ahead and order right now, as soon as you can, because the first 70 people who order we're going to give you a free unbreakable archery tumbler, so I'll put it in the package and give it to you. I will ship if you are one of the first 70 people to order. Thanks for the support. We've been waiting to release our merchandise for a long time, not only did I not want to do something like teespring, I'm not saying it's bad, but I wanted the control that I went through, actually several t-shirts to make sure you get a comfortable one.
50 bow build challenge buy tools materials to make a bow under 50 beginner bow making
Sweatshirts with hoodies. Caps. We're trying to give you something that you really like to use, so at least this is something that I like to use with good quality materials. It's not like I just bought the cheapest thing out there. We actually had to return some cheaper items and get things a little better so they could be used to my standards, at least thank you very much for all the support, thank you a million, go look for products for yourself, your children, your friends , your family, anyone. Who do you think would like to be unbreakable really means a lot to me?
Let's go back to the video. Well, that's not fun and we have our natural wood stain in case we need it. With wood glue, you can't cut it. air 100 because the glue dries on contact with air, unlike many glues that cause the arches to dry like epoxy in a chemical reaction. Another note about wood glue is that it's usually above 55 degrees and needs to cure, so sometimes when it's cold in the shop, I'll stick it here because I don't really want to be in the house, but I'll take the bow to the house and I'll put it in a closet or something to dry.
Okay, this pine board I'm going to make one. Take out the tillering stick by cutting it and gluing a few pieces together. Now I have it, you might be wondering why not grab a 2x4 for the tillering stick, so I decided to try working harder, not smarter, so what I did was just grab this. An extra piece of oak I made an indentation, slid the knife into it and then also slid the saw blade or hammered it in, so now I have a handle for the saw blade and a scraper for the second knife. The tool I made is this little thing.
I cut a slit and an extra piece of the tillering board and then slid in the razor blade. I broke off a piece of the hacksaw blade that I could get in there and then made a second side. The wood to join it together to hold it tight and I used a lot of gorilla glue so now I have a handle for a small pocket knife. So far I have removed one side and I am missing three to get the arch. to shape it and then I will make the back of the bow, after that I think the best method is to use the saw blade to cut notches to the depth I want and then go ahead and use this pocket knife to shave as much off as I can finish with the rasp to level it and then grab the scraper at last to make it as smooth as possible, now that method worked very well, the first side took me about an hour and 15 minutes, the second side took me 10 minutes, so doing those tools made it much faster, okay we have the sides tapered to what we want, they are not completely straight but that's okay for today and now it's time to back up the bow.
This trunk diagram I drew fantastically is quarter sawn. meaning these green lines are exactly how you would cut the wood from this log. Now down here we have a flat sawn and it's cut flat. Basically you can now make bows out of quarter sawn logs, but what you have to do is add your own bow backing, but in an instant on board, what you can do is follow a little growth ring and allow that growth ring be the back of your arch. Today, this trunk is flat, so we must follow one of these little growth rings.
If we can get a strong backing for this bow, luckily I took the time to choose a good piece of wood so it won't be too difficult to back up. I got it inside a growth ring as best I could, so now we're going to move on to grabbing material from the belly of the bow so we can start bending it. These chips aren't taking up material at all, but it's working, so if we keep moving, we'll make amazing progress. how much can you get if you chase it with this little razor blade, hit that right angle, get pretty good shavings, peace, what's up here?
The arch is the fourth day of this project and I'm wearing the same clothes because you just take them off and throw them right there and then put them back on when I get back to the store that way I don't mess up the house the first day we got the materials the second day I almost short the finger it's a good idea to be careful with the razor blades on the third day I got tired so I stopped and went and made some products necessary to fulfill some orders and today is day four and we are in the adaptation stage of the floor , we've removed enough wood that we're getting close and now it's time to cut these slots so we can start bending the bow with a string beyond the tillering of the floor.
I'm not going to put the slot on the back of the bow because we don't have one. tip overlaps there's the first one not so bad both sides are ready we're ready to continue tillering now my thumbs hurt from scraping with these little razor blades what tools would you have chosen so far? I'm thinking maybe I could have gotten a cheap pocket knife or chisel or something instead of that rasp and it may have been more beneficial if the store didn't have knives. I thought about a spoke shave, but I don't know if the price would have been worth it, so what tools would you have purchased?
It's time to scrape again and continue working with these little guys. Oh, I forgot to notch my tillering fold. I'm going to do it very quickly. I think I took a lot. of wood, so it should bend, which looks surprisingly good, maybe that's the benefit of removing the wood so slowly because you can really take control. I've actually been considering bagging this with Gorilla tape because I don't know. I don't think I perfectly followed the growth ring on the back and a while ago I did a test with duct tape on an osage orange bow that had already picked up a splinter and it was good to hold that splinter now if there is no backing at all and it's not just pick up a splinter, I don't think it's a good backing at all, but I think it can benefit and help hold a splinter, so with that in mind, I think I'm going to put the gorilla tape on the back because I can't damage it and I really want this bow to work, my goodness, the paracord shakes terribly, it stretches a lot, but we have a string, we are

making

very good progress.
One of the

challenge

s of trying to use paracord as a string is It stretches so much and that makes it really difficult because you bend the bow very, very far to string it and then it stretches all the way to here, but we're almost there with a bow. I'm going to try shortening the string and restringing it. Okay, I hate this part of stringing the bow when you're not sure if it's any good, look how far I'm bending, that's like a 10 to 12 inch brace height way beyond what it should be, oh man, okay, hold on tight, yeah. yes yes yes yes yes okay, let's check the rudder real quick, I don't have a tape measure, but if I hold my hand so that the lower limb bends a lot more, we want the upper limb to bend a little more that way, we have a positive rudder, so we're going to remove the wood from the top branch before we move forward and the height of this support has already shortened quite a bit while it's here, it just continues to get shorter and shorter and shorter.
Paracord is not a good material for strings, but I'm going to try to make it work today, we're very close here, so I'm going to finish fitting, finish the handle and we'll show you this finished product, the bow is made. I'll show them to you in a minute, but first let's get to the arrows. I have some wooden dowels here that I'm going to use for the arrows and I'm going to use the gorilla tape for the arrows, but one of my biggest problems was how to make an arrowhead and I was trying to get a steel tube so I could put it on top and hit it on the front and make a point and file it so it was basically a heavy front arrow, but that was too expensive and they didn't have them pre-cut, they just had them in a longer section that was like twelve dollars, it didn't fit our budget, so instead I bought a small hex nut that I'm going to screw on. the peg and just sharpen the peg and this is just to add weight it may be a terrible idea but it was the best idea I could think of for 15 cents hey that fits pretty well oh okay there's the bow Now if it doesn't shoot, then what's the point, so let's try it with these 50 tools, arrows, everything you need, um, okay, so these arrows are absolutely terrible because you can't stick them past the nuts on the that don't stick. the target on top of that the fletching is so heavy it just tips over and falls back there is no focus it's like the back of the center is the center of balance but we won't stop there let's shoot some normal arrows with a normal bowstring and Watch this bow really shoot you.

If you have any copyright issue, please Contact