YTread Logo
YTread Logo

350z How To Remove And Paint The Dash Bar (Part 2)

Jun 07, 2021
where I took it off to get the wires out, things like that, I just need to go through them all again, okay guys, everything is taped together, I have this thing, I unplugged everything. I just need to get one bolt out of there and that one over there, okay guys, after hacking and cutting the guy with that thing out of my way, uh, I was actually able to hold it, okay, that last piece is nice, oh, I wanted that one Heller piece for so long. The only thing holding it together was one of the things for the antifreeze slot that came out okay so now with everything out of my way I can go ahead and start getting everything ready man well governor some more junk cable , a refuge.
350z how to remove and paint the dash bar part 2
I didn't connect most of everything, so I have this whole man open. Now I decided I'm going to go ahead and wait to do this piece, go ahead and do everything else, and once everything else is done, I can move the plastic and stuff. Do it tomorrow or even today if I finish these Kooks in time, that's why these cables are in the way man, so I moved it out of the way enough so I can do everything here and then I'll put the cables back when everything is done and then I'll do that piece right there so the shave is ready man we're all ready to go so now I just need to get the alcohol and prepare it with some alcohol man oh man it's all set. with alcohol so now I'm going to bring a sheet here throw it down to protect everything hello guys everything is protected so let me go ahead and put on this first layer here man can't wait to see what it looks like okay guys.
350z how to remove and paint the dash bar part 2

More Interesting Facts About,

350z how to remove and paint the dash bar part 2...

The first layer is on, yeah it's amazing, I love it, it's actually an incredible pain trying to do this with everything in the form, man it's actually quite difficult, it probably took like half an hour, just do it or maybe Lorentz do everything, just move, everything, but. Okay, so I won't bore you any further. I'll be back when the third layer is done, man. Okay, so while those coots are drying, I thought it would be a good time, it's got the grinder and cutting wheel next door, they're all that works. This would be a perfect time to jump in here and start cutting everything up.
350z how to remove and paint the dash bar part 2
This man brought me this. He forgot to give me the piece for the tooth. Great, so I'll have to make do with what I can get with the grindstone man over there. come on, it's all cut out, I need to cut it out, uh, I couldn't grind out all the little bumps and stuff, but it's no big deal, I mean, this piece isn't show quality or whatever, and it'll just be cool to

paint

it. I didn't do much there, but it's all good, so this is ready to be primed and

paint

ed. I only did two in this one because it's not a high traffic area like we are here.
350z how to remove and paint the dash bar part 2
I needed three, she was busted and airbrushed, so now none of them basically ever go back there, but look at this man, ah yeah, I got everything I could in there, I can reach it now, like I said, once I get it all back together , I'll be back there with that piece it's rusty, it's spinning, that boot, your steering column and I'll be back, I'm loving this man, it's still very wet, so it won't look as bright and shiny as tomorrow, yeah, and then I will do that. Eventually grind these pieces or cut them. Pete, do you paint those pieces?
Yes, and I still want to do it before I put this back. Just scrape it off and give it some black paint. I do not do it. a little worried about the clear coat, maybe that thing no one is going to be on top of the passenger seat and it's clean under the clear tail pipe, no one is going to touch that thing and of course you guys know that at the end of the long day , man. I would like to get rid of the weight that I worked so hard to get rid of, let's do this.
Wow, it's surprising how much weight is there. It's crazy. We really tried to use scales this whole time and I really wish I had started my build from the beginning. and and I documented everything, but you know, I've thought about maybe a day a day get another 350, see just get the HR version and start over, but be extremely in depth, like document the whole thing instead of three quarters of the time . through construction like when I started, so let me go ahead and apologize. I don't know how bad the audio will be. I forgot to plug in the microphone enough.
I did it all day if it was just the last two clips or whatever but I feel sorry for that man okay guys that's going to wrap this up man the bed liner is done except the little

part

of the steering column, all the cables are done, I will only need. I'll wait until I have everything back in place. car and the car completely together and then I'll have the wire stick out or zip tie it where I want it and all that good stuff so make sure you guys stay tuned because the next step is going to be prepping and painting this thing man. and the steering column thing too, but yeah, you guys like the video, make sure you mash that thumbs up, you guys knew the channel, you want to see more content, that subscribe button and please.

If you have any copyright issue, please Contact