#2. Concentrated alcohol inks in resin. The Fire Whisp effect. Tutorial by Coopers Custom Casts.

Hello everyone, we are back. Today I'm going to show you how to create not only my

effect

s with regular

alcohol

inks

, but also with one of the popular ones I made:

fire

streaks. I'll show you how to do it. Thanks to everyone who subscribed I liked it um if you haven't don't forget to hit the like button and subscribe to the channel for more information so basically we're going to go exactly the same way we did with my last

tutorial

, since we are going to be using the two part hx dz-fx

resin

, the ones we are using today we are using more

concentrated

resin

, so I actually find less layers with these, so I will start by measuring the resin again, I care about the weight. no volume, I'm going to say 30 grams of each, now we're going to use 25, I'm going to be too mad, I know you've all been waiting for this one again, I said I wouldn't charge for my

tutorial

s.

I want it to stay like this. I want it to stay like this. I mean, this is my job now, but once you have it, you'll be able to do pretty much anything you need. I think the batteries are running out on my scale. I'll give it a good stir. I rushed this process last time and it made us nervous. I see it as a kind of cloudy texture. Most of the images you have seen on Facebook. I know many people are sharing their own work. and it's great to see, but I'm afraid you're probably going to see a lot more now from everyone, but it's great, so again I have my container with not hot water, just warm, which is safe enough to touch.

I'm just going to try to get the same consistency that I got in the last video with the opaques again. I wouldn't recommend mixing too much at once because it can start to settle in the cup, especially when you're heating the bowl the way I like it. a fine drizzle, I think that will do it. Make sure to dry the bottom of the mixing glass in case water drips into the mold because that would destroy your work again. Release the spray. Spray quickly. Now I'm going to use my new needle tip it's a little more controllable let's resin we have started doing this big bottles I don't know if they are available everywhere but huge bottles come with funnels it's much easier to control the wax let's shake them off the lids, done, we're going to use yellow orange and red, that's just the other spare white that I was going to use, but I'm going to use the tip of the needle instead of pinching the cup again, you don't want to fill it up.

These are too high because you need to leave room for the

inks

. Let's go back to just using the normal ones that I make again. I will show the links for the molds in the description. Any other parts I used, you can do that. use other things, I mean, I have used them, I have mixed different inks in the past, I don't always stick with one thing, let's try these ones that would work and I got my little torch, these are pretty good, these I have one from Amazon, they It's turned on, it has like a rechargeable lighter in it, yeah, pretty good, I just kicked mine through.

I like the sound, it still has some bubbles waiting to appear, but for the purpose of the video, I'm not that. quick so what we want to do to create this if you look at the back most of the yellow is down on both because we don't want too much yellow down there because what we're going to do is I'm going to use the yellow to draw the flame towards the interior of the piece, so it's a matter of exercising when I start with the yellow, for example, I'm going to do two drops on each of them and then I'll go with the reds on top.

I'm going to put two drops of that in as well and then I'm going to throw in some orange where I can see the reds and the oranges pushing the yellow down, all of that will change because we have to add. the white now, so let's start with the white on top of the yellow to push that yellow up. Hopefully, I'll hit the orange and then the red. You'll see it start to push that yellow down. I continue with that and now I am going to place the yellow at the bottom of the hearts, two in each one, the red at the tips, it is not necessary, it is not really necessary to use the orange because the yellows and the reds merge and they turn orange anyway I just like to put them in the gaps just to give it a little extra color and then again with the white these

concentrated

inks you don't really need to do many layers if you use a less concentrated ink you may need to use more, so you basically repeat and go over what you've already done.

I might do that depending on how they settle, we're going to leave the orange out of these, so I have a little bit of a clear area around these two circles here, so after all, I'm going to throw some orange in there, but you definitely want to be able to see a concentrated area of ​​yellow at the bottom for when it comes to doing the needle

effect

, no I'm not going to say it in Stewie's voice this time, when I saw that again I winced, so we're onto something with me two seconds, yeah, so you can see what we have.

Some light areas here, so let's go back with the yellow, again with the red, same with these two hearts. I'm just pushing that down. I'm going to come back to these, they are very clear here. I don't know if you can see any clear spots, I think that's it until I come back shortly and we start putting the flames in, give it probably the same time as last time, 45 minutes to an hour, okay, I'll see you. We'll be back shortly, we're going to start adding my cowlick, so like I said, we want to draw the yellows into the reds.

I'm not too sure on this one, I think the white is too strong on that one, but come on. to continue anyway, I never know how it will turn out, it might have a little cloud effect at the top, I won't know until tomorrow, so we'll start down in the yellows, not too far down, and go to draw that flame again draw the yellow up if you have any questions about anything put it in the comments thanks to everyone who commented last time I think I managed to comment to all of you draw that one up there make a small one there I think we're going to go up on this side in that one just move this round and the hearts come out there and this one do it backwards it doesn't matter again you want a slightly stringy consistency when you draw the Needle I'm going to try to make quite a few small ones on these rounds because there's quite a bit of yellow at the bottom maybe one big here, that's what I love about making these because you're drawing your design at the end.

The piece just adds a little more artistry to the resin, which means tutorials to come. I'll show you some other things I've done with different effects, ways to manipulate colors. I'm still new anyway, I have many and many. ideas and many things I want to try with resin, so yes, I will continue posting tutorials. I'm not sure if there is such a thing as an alert on YouTube. I know they used to be used there. It used to be like a bell. I would let you know when someone has uploaded a video because in many of the Facebook groups, I can understand why you can't post links to your channel and videos.

I know there are a lot of people who want to see this technique, so I will try to see when I upload it if there is a way to notify subscribers that everything is new to me, so I don't know, there must be a way for you guys to see it and I don't have to do it. Spend hours in the groups messaging people right, I think that's it again, thanks for the donations from last time, the link is still there, the PayPal link, I'll really appreciate it, and we'll come back tomorrow and We'll unmold these, thanks for joining. okay, let's see how they turned out, start down here, see that flame effect drawn a little bit like a sink there, that's cool, sorry, my focus isn't popping yellow as much on this one, we can still see the flame effect on that hmm maybe that one needed a little more yellow it's a bit like a fork or Neptune what's the name of its um can't remember the name now hmm it's got a little wave on the front of that one I'm not To be honest I'm overly impressed with these, the only one I've really liked so far is this one, with clear light spots, that one again isn't as yellow, that's great, a couple of spots still I think what I needed to do with these.

It's waiting a little longer, I think what happened is that the yellow hasn't been pulled out properly, but again, this is great, thanks for watching, right click if you want more, like the video and see you soon. Thank you all